Download & Install Android 7.0 Nougat Firmware on Galaxy S6/S6 Edge (SM-G920F/925F)

S6 Edge's official Android 7.0 Nougat has begun rolling out. Here is a very easy-to-follow guide in order to download and install the new Android 7.0 Nougat stock firmware with your Galaxy S6 Edge. Android 7.0 Nougat gives your Galaxy S6 Edge an existence that you've been wanting for that long.

The status bar on the phone has become new as well as the whole notification bar is totally new as well. At the moment it's rolled out only to the G925 variant with the Galaxy S6 Edge, even so, the same procedure will probably be used for other variants with the Galaxy S6 Edge.

Go through the many preparations carefully after which start flashing the Official Android Nougat software in your Galaxy S6 Edge.

Early Preparations

To check out what device you might have, head to Settings > More/General > About Device or Settings > About Device and match the model number.
In case your device goes dead over the flashing process, your device might get soft bricked and also you might be needing flashing stock firmware and will ultimately bring about wiping increase your data also.
Backup everything!
Backup SMS Messages
Backup Call Logs
Backup Contacts
Backup Media – Copy your files manually to a PC or Laptop.
Backup EFS – If rooted, otherwise skip this.

Make certain you let down Samsung Kies when using the Odin3 flash tool. Samsung Kies will interrupt Odin3 and will lead to causing errors and may even not permit you to flash your desired firmware. Also, make without doubt you switch off any antivirus software you’ve installed plus disable firewall to prevent any connection and flashing issues.

Required Downloads & Installations

Download and install Samsung USB Drivers on your PC.
Download and extract Odin3 v3.12.3
Firmware for G925F and others
Version: Android 7. Nougat
PDA: G925FXXU5EQBG
MODEM: G925FVFG5EQBG
Download Android 7 Nougat for G925F | Download Android 7 Nougat for Other Galaxy S6 Edge Variants
Extract the downloaded firmware file to have the .tar.md5 files.
Image only employed for reference here.
Download and install Galaxy S6 Edge Official Stock Android 7.0 Nougat
Make without doubt you browse the instructions as listed above carefully and you also are all set to go ahead now.
Wipe your device complete as a way to attain a neat installation. You may boot into the recovery mode and carry out a factory data reset.
Open Odin3.exe.
Put your Galaxy S6 Edge in download mode. To do so, turn it off and watch for 10 seconds. Turn it on by pressing and holding Volume Down + Home Button + Power Key simultaneously, You should view a warning, press Volume Up to continue. In case this approach doesn’t do the job, try one from this ebook.
Connect your device to your PC.
As soon as Odin detects your phone, the ID: COM box should turn blue.
Now in Odin, selects the files individually as shown in the picture.
Select BL tab and select the BL file inside it.
Select AP tab and select the PDA or AP file inside it.
Select CP tab and select the CP file from it.
Select CSC tab and select HOME_CSC file from it.
Make certain that the options selected with your Odin are the same manner shown in the pic.
Hit start and wait till the firmware flashing is complete, The flashing process box will turn green upon successful flashing.
Once the flashing process continues to be completed successfully, disconnect your unit and reboot it manually.
Once the unit boots up, checkout the newest firmware now.
Your device is going to be running on official Android 7.0 Nougat firmware.
Once updated to stock, don't try to downgrade, or else you will cause messing up EFS partition of your respective device.
That’s all!

Got questions? Make certain that you drop em’ within the comment box below. Good Luck!